Effects of polysaccharides and polyphenolics fractions of Zijuan tea (Camellia sinensis var. kitamura) on α‐glucosidase activity and blood glucose level and glucose tolerance of hyperglycaemic mice

The effects of polysaccharides, theaflavins, thearubigins and theabrownin fractions of Zijuan tea on α‐glucosidase and blood glucose level and intolerance of hyperglycaemic mice were evaluated. The polysaccharides or theaflavins fraction exhibited greater inhibition rate of α‐glucosidase than acarbose positive control, thearubigins fraction or theabrownin fraction. The four fractions were delivered to the treatment mice through oval gavage each day for 15 days. The mice in polysaccharides and theaflavins high‐ and low‐dose and theabrownin high‐dose treatments significantly lowered their blood glucose levels while all the treatment mice gained body weight. The mice in polysaccharides, theaflavins and theabrownin high‐ and low‐dose treatments had greater glucose tolerance as well. Thus, the theaflavins and polysaccharides fractions of Zijuan tea effectively moderated the complications of hyperglycaemic mice. The lower effectiveness of thearubigins and theabrownin fractions may be caused by the highly polymerised polyphenolics which decreased their accessibility to α‐glucosidase and digestibility in mice.     

Doping manganese into CsPb(Cl/Br)3 quantum dots glasses: Dual-color emission and super thermal stability

CsPbX₃ (X = Cl, Br, I) perovskite quantum dots (QDs) represent bright and tunable photoluminescence, it is regrettable that the air instability and poor water resistant properties prevent their application in optoelectronic devices. At the same time, the toxicity of lead is also a major factor restricting its development. As a consequence, we demonstrate the partial replacement of Pb with Mn through conventional melt-quenching and heat-treatment method preparation of Mn-doped CsPb(Cl/Br)₃ QD glass. Mn-doped CsPb(Cl/Br)₃ QD glass exhibits high luminescent intensity like QDs. It is important that Mn-doped CsPb(Cl/Br)₃ QD glass with Dual-Color maintained the same lattice structure like Mn-doped CsPb(Cl/Br)₃ QDs, and highly homogeneous spectral characteristics of Mn luminescence. The intensity and position of this Mn-related emission are also tunable by altering the experimental parameters, such as the Pb-to-Mn feed ratio, annealing temperature. More importantly, the as-prepared orange Mn-doped CsPb(Cl/Br)₃ QD glass was employed to fabricate white LEDs combined with a commercial Ce³⁺:Y₃Al₅O₁₂ phosphor-in-glass (Ce-PiG) on top of a InGaN blue chip. And the constructed WLEDs generate a warm white with an optimal luminous efficacy (LE) of 67.00 lm/W, a high CRI of 81.4, and a low CCT of 4902 K.     

选区激光熔化工艺参数对气雾化316L不锈钢粉末成形制品性能的影响

本研究系统考察了激光功率和扫描速度对316L不锈钢粉末选区激光熔化工艺成形熔道、制品微观组织及力学性能的影响,并分析了各类缺陷的形成原因。研究结果表明:在低激光功率和高扫描速度条件下,熔道中出现了大量球状颗粒,这些颗粒之间的空隙恶化了下一层粉末的熔化条件,这正是成形制品中熔道分布混乱以及孔洞、裂纹产生的根本原因,进而导致成形制品力学性能降低;在高激光功率和低扫描速度条件下,熔池快速升温/冷却的热应力作用增强,使得成形制品的熔道交界处也存在孔洞和裂纹等缺陷。在本研究实验条件下,激光功率为350 W,扫描速度为1750 mm/s时,SLM成形制品的力学性能最为优异,其中抗拉强度为731 MPa、屈服强度为638 MPa、断后伸长率为40.0%,致密度为96.27%。     

Axisymmetric hub-endwall profile optimization for a transonic fan to improve aerodynamic performance based on an integrated design optimization method

Structural and Multidisciplinary Optimization - This paper investigates an optimization for the axisymmetric hub-endwall profile of a transonic fan designed for a civil high bypass ratio turbofan...     

OPM3要素对项目组合管理能力影响的SD建模与仿真

根据组织项目管理成熟度模型（OPM3），确定影响项目组合管理能力的OPM3要素，分析OPM3要素与项目组合管理能力的因果关系，构建系统动力学模型，仿真模拟OPM3要素对项目组合管理能力的影响。仿真结果表明：OPM3要素与项目组合管理能力正相关；OPM3要素对项目组合管理能力的影响在短期内并不显著；在OPM3要素中，对项目组合管理能力影响较为显著的是战略执行与规划、组织领导能力和信息分析。     

Developing high-performance laminated Cu/TiC composites through melt infiltration of Ni-doped freeze-cast preforms

Nacre-inspired laminated composites have been proven to possess a unique combination of strength and toughness. In this study, we fabricated nacre-mimetic Cu/TiC composites via unidirectional freezing of aqueous TiC slurries containing different amounts of NiO additives, followed by ice sublimation, carbothermal reduction of NiO to Ni during sintering and then gas-pressure infiltration of the Cu melt. The introduction of Ni greatly facilitated the densification of ceramic lamellae and enhanced the interfacial bonding between Cu and TiC. The resultant composites displayed outstanding damage tolerance and anisotropic electrical conductivities. Specifically, for an ～31?vol% TiC–Cu composite containing 24?wt% Ni in the ceramic lamellae (based on the TiC content), a fracture toughness (K_Jc) of 72.5?±?1.0?MPa·m^1/2, work of fracture of 53.4?±?3.5?kJ/m², bending strength of 725?±?11?MPa and longitudinal electrical conductivity of 22.7?MS/m (～60% of the Cu matrix) were achieved, which were approx. 81%, 536%, 122% and 97% higher than those of the Ni-free composite, respectively. Noticeable toughening was demonstrated to be a consequence of multiple cracking, plastic deformation and uncracked-ligament bridging of the metal layers, as well as crack deflection and blunting. On the other hand, significant strengthening resulted from tailoring the microstructures in the ceramic layers and at the Cu/TiC interface as a result of Ni doping. We believe that the facile strategy adopted herein provides an effective way to solve the problems of wetting and bonding related to metal infiltration and can be readily extended to the preparation of other nacre-inspired metal?ceramic composites.     

Reaction synthesis of spark plasma sintered MoSi2-B4C coatings for oxidation protection of Nb alloy

MoSi₂-B₄C coatings with different B₄C contents were prepared on Nb alloy by spark plasma sintering (SPS) process. Powder mixtures of Mo, Si and B₄C were used as the coating starting materials. Besides MoSi₂ and B₄C phases, small amounts of SiC and MoB are also found in the coatings because of the reactions of Mo, Si and B₄C powders during sintering. Compared with single MoSi₂ coating, the MoSi₂-B₄C coatings show better oxidation resistance at 1450?℃, and dense B₂O₃-SiO₂ oxide scales form after 100?h oxidation. The B₄C or MoB in the MoSi₂-B₄C coatings can serve as the B donor for the formation of B₂O₃. A slight degradation in the microstructure of the MoSi₂-B₄C coatings after oxidation is observed, which can be attributed to the presence of an NbB layer in the inter-diffusion zone of the coatings that retards the inward diffusion of Si from the coating into the substrate alloy. The microstructure development and oxidation behavior of the MoSi₂-B₄C coatings have been discussed.     

Rapid screening of DON contamination in whole wheat meals by Vis/NIR spectroscopy and computer vision coupling technology

This work intends to develop an online experimental system for screening of deoxynivalenol (DON) contamination in whole wheat meals by visible/near-infrared (Vis/NIR) spectroscopy and computer vision coupling technology. Spectral and image information of samples with various DON levels was collected at speed of 0.15 m s⁻¹ on a conveyor belt. The two-type data were then integrated and subjected to chemometric analysis. Discriminant analysis showed that samples could be classified by setting 1000 μg kg⁻¹ as the cut-off value. The best correct classified rate obtained in prediction was 93.55% based on fusion of spectral and image features, with reduced prediction uncertainty as compared to single feature. However, quantification of DON by quantitative analysis was not successful due to poor model performance. These results indicate that, although not accurate enough to provide conclusive result, this coupling technology could be adopted for rapid screening of DON contamination in cereals and feeds during processing.     

Hierarchical FeC/MnO2 composite with in-situ grown CNTs as an advanced trifunctional catalyst for water splitting and Metal−Air batteries

In high demand is developing trifunctional electrocatalysts to simultaneously drive hydrogen evolution reaction (HER) and oxygen evolution/reduction reaction (OER/ORR) for metal-air batteries and water splitting. Here we develop the carbon nanotubes (CNTs)-grafted FeC/MnO₂ nanocomposite catalyst by carbonizing FeMn metal-organic frameworks. The synergistic effect between FeC and MnO₂ dominantly contributes the ORR, OER, and HER. The transition metal-mediated growth of CNTs by an in-situ catalysis mechanism enables high electrical conductivity, abundant active sites, as well as efficient reaction pathways. The optimized chemical composite and unique hierarchical structure endow the FeC/MnO₂ with low overpotentials for multiply electrochemical reactions. Consequently, the composite catalyst successfully serves as the bifunctional electrode for water splitting with a voltage of 1.66 V at 10 mA cm^?2 as well as the cathode for all-solid-state metal-air battery with Pt/C-comparable performance. The advanced transition metal composite presented in this work provides the guidance for rationally developing trifunctional electrocatalysts for efficient integrated energy conversion systems.